KSW STUD WELDING MACHINE – TWIN TORCH

KSW STUD WELDING MACHINE - TWIN TORCH
TWIN TORCH WELDER



Advantages:
  • Soft-switching inverter technology, small size, light weight, energy saving and environment friendly.
  • Modular Design, Full range of protection and use of pure IGBT devices, machine safety and reliability, low failure rate, no professionals required.
  • Waterproof board, anti-corrosive, moisture and dust resistantcan be used in field operations such as tunnels, high-rise buildings
  • Stepless welding current regulator, Displays the welding time, parameters and input voltage. Convenient and practical.
  • Fan-dormant, energy-saving and reduces dust. 3 times better life.
  • Voltage compensation occurs during lower voltage, where the device automatically stabilises the welding parameters, when ultra-low voltage occurs the welding equipment can still be normal as its forces are much higher than ordinary welding machine. The special characteristics apply to: Power shortage and when the equipment is used in multiple construction projects at the same time
  • Welding controls are available in manual and automatic at conversion, to adapt to a variety of welding technology.
  • Welding parameters have been set up in panels in a comprehensive, real-feel equipment.
  • A reasonable output voltage design, the use of welding torch cable can be extended. Sustained high load, high anti-fatigue.
  • High-strength steel plate electrostatic spraying. The chassis is strong and corrosion resistant.

    • Technical Specifications
            Latest IGBT Technology .
            Only 1/3 weight of a Thyristor Type
            Modular design, easy and fast to provide after service.
      Wide voltage range
            30% Saving on Electricity
            30% Dual Cores enable simultaneous welding
           
    MODEL
    2DA-2500i
    2DA-3150i
       
    Status
    		 Single torch Twin torch Single torch Twin torch
       
    Stud range
    		 Φ6mm-Φ28mm Φ4mm-Φ18mm Φ6mm-Φ36mm Φ4mm-Φ20mm
       
    Welding current
    		 400A-2500A 300A-1250A 400A-3150A 300A-1550A
       
    Welding speed
    		 Φ28mm
    8 pcs/min    		 Ф18mm
    8 pcs/min    		 Φ36mm
    8 pcs/min    		 Φ20mm
    8 pcs/min
       
    Welding time
    		 0.1S-3.0S 0.1S-3.0S
       
    Input power
    		 380/400/440V 50/60Hz 3 Phase 380/400/440V 50/60Hz 3 Phase
       
    Input capacity
    		 90KW 120KW
       
    Power switch
    		 160A 225A
       
    Protection grade
    		 IP21 IP21
       
    Cooling way
    		 Fan Fan
       
    Size（L, W, H）
    		 960mm×418mm×760mm 990mm×418mm×760mm
       
    Weight
    		 168+98kg 180+98kg
    MODEL
    2DA-4000i
    2DA-5000i
       
    Status
    		 Single torch Twin torch Single torch Twin torch
       
    Stud range
    		 Φ6mm-Φ46mm Φ6mm-Φ24mm Φ8mm-Φ50mm Φ6mm-Φ28mm
       
    Welding current
    		 600A-4000A 400A-2000A 600A-5000A 400A-2500A
       
    Welding speed
    		 Φ46mm
    8 pcs/min    		 Ф24mm
    8 pcs/min    		 Φ50mm
    6 pcs/min    		 Φ28mm
    6 pcs/min
       
    Welding time
    		 0.1S-3.0S 0.1S-3.0S
       
    Input power
    		 380/400/440V 50/60Hz 3 Phase 380/400/440V 50/60Hz 3 Phase
       
    Input capacity
    		 150KW 190KW
       
    Power switch
    		 250A 250A
       
    Protection grade
    		 IP21 IP21
       
    Cooling way
    		 Fan Fan
       
    Size（L, W, H）
    		 990mm×418mm×800mm 990mm×418mm×760mm
       
    Weight
    		 188+98kg 198+98kg

    Dedicated to: steel, for floor boards, bridges, embedded parts, heavy machinery, industrial plants, high-rise buildings, power plant construction, chemical building, shipbuilding, metal structure, mechanical and electrical equipment. ≥ 3mm thickness of more than welding φ10mm, φ13mm, φ16mm, φ19mm, φ22mm, φ24mm peg , M4mm-M36mm stud, screws and nails similar to that bolt. Welding materials: carbon steel, low-alloy steel, stainless steel, copper and so on have to arc welding of materials. In the surface oxide layer, the film, primer or plating to deal with the welding work on the facilities. After the welding deformation is not no marks convex, flat welding, welding, welding Yang, the all-welding.